data brief rev 1 november 2005 1/3 3 AC7MDT10-D32/s28 sdip32/so28 connection kit for st7mdt10-emu3 the sdip32/so28 connection kit (ac7mdt10- d32/s28) provides the hardware you need to connect your st7mdt10-emu3 emulator to your application when debugging applications for st7 microcontrollers in sdip32 and so28 packages. connection kit contents sdip32 adapter (db510) ? allows the connection of your st7mdt10-emu3 emulator to your application board in place of your st7. sdip32-so28 device adapter (db359) ? adapts the sdip32 adapter to so28 footprint of the st7 on your application board. for more information... st7-emu3 user manual ? information common to all emu3 series emulators st7mdt10-emu3 probe user guide ? information specific to st7mdt10-emu3 figure 1. sdip32 adapter sdip32 adapter (db510) figure 2. sdip32 application connection figure 3. sdip32 to so28 device adapter 1. solder socket on to the application board. 3. align pin 1 indicators, then insert the pins of the sdip32 adapter into the socket on the application board. pin 1 indicators 2. plug the sdip32 adapter into the w2 connector on the target emulation board of your st7mdt10-em3. application board sdip32 adapter (db510) so28 device adapter (db359) www.st.com
AC7MDT10-D32/s28 2/3 revision history figure 4. so28 application board connection date revision changes 14-november-2005 1 initial release. 1. solder the connection pins to your application board in place of your mcu. when soldering, insert the connection pins into the device adapter, which serves as a support to ensure correct alignment. 2. plug the sdip32 adapter into the w2 connector on the target emulation board of your st7mdt10-em3. 3. align pin 1 indicators, then insert the pins of the sdip32 adapter into the sdip32- so28 device adapter. pin 1 indicators application board
AC7MDT10-D32/s28 3/3 information furnished is believed to be accurate and reliable. however, stmicroelectronics assu mes no responsibility for the co nsequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. no license is granted by implication or otherwise under any patent or patent rights of stmicroelectronics. specifications mentioned in this publicati on are subject to change without notice. this publication supersedes and replaces all information previously supplied. stmicroelectronics prod ucts are not authorized for use as critical components in life support devices or systems without express written approval of stmicroelectro nics. the st logo is a registered trademark of stmicroelectronics. all other names are the property of their respective owners ? 2005 stmicroelectronics - all rights reserved stmicroelectronics group of companies australia - belgium - brazil - canada - china - czech republic - finland - france - germany - hong kong - india - israel - ital y - japan - malaysia - malta - morocco - singapore - spain - sweden - switzerland - united kingdom - united states of america www.st.com
|
